19" Wall Mounting Cases

Cannon 3000 Series

Flat Pack Double Section Enclosure Range with Glass Doors

600mm wide with glass door

• A wall mounted back section, which is not visible when the unit is closed for 19" mounted interconnection and is concealed within the front equipment section.
• Full 90º opening of front equipment section
• Easily demountable front section via spring loaded retaining pins
• A single key lock secures the front section to the back section
• Supplied flat pack
• New modern and stylish soft-line appearance
• Quick and easy to assemble by one person - from pack to wall in approximately 5 minutes
• Integral ventilation slots in the top and bottom covers
• Simple construction with the minimum number of piece parts
• Infinite depth adjustment of 19" mounting posts
• Unique cable gland system top and bottom providing cable tying points - no loose gland plates, no cutting or drilling required, just bend down sectional flaps to achieve desired size of opening - from 25x13mm to 100x50mm
• Internal slots for lacing incoming cables
• Steel construction with high quality powder paint finish in Velvet Black to RAL 9005
• Complete with lockable, hinged front-glass door

Depth

500mm nominal to door (actual overall 525mm)
Maximum load capacity is 25kg subject to fixings and wall conditions

Assembly

1. Assemble the top and bottom covers to the two side panels and fit the two pre-assembled 19" frameworks inside, in the desired position

2. Determine which side the cabinet should be hinged

3. The front equipment section can then be fitted to the back section and retained with the two  spring loaded pins

Home Page    Product Page   19" Data Cabinets    Ordering Information